Power cycle netgear router to get rid of any connection-associated issues! Sometimes, your Netgear router doesn’t work the way it is supposed to and you feel trouble receiving the desired level of connectivity.
In such situations, you can perform a full power cycle to make your entire wireless network competent once again. The process of power cycle involves shutting off all the networking devices available at home, then, switching them on once again.
When should you decide to power cycle netgear router?
Here are the issues that make the power cycle modem and router necessary:
- Not able to access the internet connection via any device
If you are unable to find an internet connection with any of your networking devices at home, you should try this process. Sometimes, the Netgear router presents connection issues that restrict all devices from establishing a connection. Performing a power cycle can get you back online once again.
- Internet connection doesn’t provide online access
Maybe you are able to establish an internet connection on your devices on the home wireless network. However, the connection isn’t letting you go online. This is another reason why you should utilize the method of power cycling everything to obtain online access once again.
- The router isn’t establishing an internet connection
If your Netgear router is not establishing an internet connection, you need to do something about it. The best way to try in this situation is power cycling all your networking devices along with your router and modem.
Correct sequence to power cycle networking devices
It is necessary that you follow the right sequence when turning OFF, then turning ON your devices to properly reset everything. Follow these instructions to successfully power cycle home network:
Situation 1: You have your standalone DSL/Cable modem along with the router.
- Shut down or turn off all networking devices you have, including your DSL/Cable modem, Wireless, and Wired devices, and Wired/Wireless router as well.
Note: Make sure you remove the battery backup from your modem, if your modem contains one.
- Switch on your DSL/Cable modem before anything else and allow it to boot up. After a few minutes of booting up, you should check the stability of your modem’s LED lights.
- After completing the power cycle modem automatically, you can switch on your Wireless/Wired router. Now, your router will create a connection with your modem. Wait for a few minutes until the connection gets established. You will see a solid green color LED light visible on your router.
- Switch on all the wireless and wired devices.
Situation 2: You have your DSL/Cable modem router
- Shut down or turn off all the networking devices such as your DSL/Cable modem router as well as all the wireless and wired devices.
- Switch on your DSL/Cable gateway before any other device and allow it to boot up. Give it a few minutes, so the DSL/Cable modem router can complete the syncing process and establish a connection with the ISP. The LED lights will become stable, verifying the successful synching.
- After your DSL/Cable Gateway finishes the ISP connection process, you can switch on all your wireless devices and wired devices as well.
You can even power cycle router remotely. Contact our team for power cycle guidance to get back the original strength and performance of your wireless connection.